GF-Dual Rotating Offset

An offset arm that rotates at both ends: the bottom joint and the top joint each turn and clamp solid, so the head can be set off-centre, swung around an obstacle or pushed hard against a wall — and brought back to exactly the same position afterwards.

Top and base mount are chosen per order: Mitchell plate or 150 mm bowl insert above; Mitchell, Euro clamp or Euro adapter below. The matching pair of height adjusters comes with whichever top mount you pick — the low pair with the Mitchell plate, the high pair with the bowl. They are what buys the clearance for a full 360° turn; where the shot does not need to go all the way round, leave them off and the rig builds as flat as it goes. Additional top mounts are available on request.

Machined and hard-anodized in Germany by Grip Factory Munich.