THE GF-MINI SHOCK
ABSORBER.

Reduce high & low frequency vibrations and semi-hard impact shocks.

OVERSLUNG / UNDERSLUNG

02-mini-shock-overslung-underslung_1_ori

The GF-MINI SHOCK ABSORBER adapts to front or rear over- or underslung mode within minutes.

SPEEDRAIL / SCAFFOLD MOUNT

mini-shock.gif

In addition to the standard Mitchell mount, we’ve added a new Speedrail / Scaffold mount to our GF-MINI SHOCK ABSORBER System. It can be fitted to all GF-Mini Shock Absorbers purchased since 2015. The quick lock clamps do not require additional tools and will connect with tubes ranging from 42 mm to 51 mm in diameter.

​With the introduction of this new mount, the Mini Shock Absorber’s range of operation broadens to allow direct fitting to Scaffold and Speedrail rigs built on tracking vehicles, motorcycles, boat rigs etc.

GF-MINI SHOCK ABSORBER
TECH SPECS.

The GF-MINI SHOCK ABSORBER is for use with gyro stabilized heads to reduce high & low frequency vibrations and semi-hard impact shocks during high speed chases and rough crane moves. The best results are achieved when used with the GF-ISO DAMPENER.

WEIGHT
9.8 kg / 21 lbs

PAYLOAD
up to 65 kg / 143 lbs

TEMPERATURE RANGE
-20 to 50°C / -4 to 122°F

DIMENSIONS
38 x 19 x 34 cm / 14" x 7" x 13"